Stand with Ukraine flag
Try it now Pricing
Professional Edition
Community Edition Professional Edition Cloud Edge PE Edge IoT Gateway License Server Trendz Analytics Mobile Application PE Mobile Application MQTT Broker
Installing ThingsBoard PE from Azure Marketplace
Getting Started Documentation Devices Library Guides Installation Architecture API FAQ
On this page

Installing ThingsBoard PE from Azure Marketplace

This guide describes how to install ThingsBoard Professional Edition from Azure Marketplace. Using this guide you will install BYOL version of the product. Basically, you get the license directly from ThingsBoard, Inc, but purchase corresponding server instances and infrastructure from Azure.

Prerequisites

Step 1. Subscribe to ThingsBoard PE BYOL

Open ThingsBoard Professional Edition BYOL product page from Azure Marketplace.

  • Click the GET IT NOW button

image

  • Review and accept terms of use and privacy policy. Click the “Continue” button.

image

  • You will be redirected to Azure Portal. Click the “Create” button to deploy your instance.

image

Step 2. General configuration

  • You will be redirected to “Create a virtual machine” dialog with tons of setting. No worries, we are going to leave most of them with default values.
Step 2.1 Basics
  • Create new “Resource group”, e.g. “thingsboard”;
  • Add recognizable virtual machine name, e.g. “ThingsBoardPE-PROD”;
  • Choose Region from available regions list;
  • Configure “Administrator Account” to be “SSH public key”. Username must be ubuntu; See official Azure Docs on how to generate the keys.
  • Click the “Next: Disks” button.

image

Step 2.2 Disks
  • We suggest to leave this as-is, but you can optionally add new disks here;
  • Click the “Next: Networking” button.

image

Step 2.3 Networking
  • Leave all settings as-is;
  • Make sure This VM uses preconfigured network security group;
  • Click the “Next: Management” button.

image

Step 2.3 Management, Advanced, Tags
  • Leave all settings as-is on all three tabs;
  • Click the “Next” button until you reach “Review + create” tab.
Step 2.4 Review + create
  • Review the final product details;
  • Make sure your name, email address and phone number is correct;
  • Click the “Create” button to start the deployment.

image

  • Once deployment is started it may take up to 30 minutes (but usually less then 5 minutes) to complete;

image

  • Once your deployment is complete, click the “Go to resource” button.

image

Step 3. Review created resource

You will be navigated to the resource overview page. We should use this page to copy the external IP address of your instance. Please copy this IP address to a safe place. We will use it in our next steps.

As an example, on the image below, the IP address is highlighted and set to “40.121.179.240”

image

Step 4. Obtain your license secret

In order to activate your ThingsBoard instance you will need to get the license secret. ThingsBoard Licenses are managed by ThingsBoard License Portal.

Please register on ThingsBoard License Portal to get your license. See How-to get pay-as-you-go subscription or How-to get perpetual license for more details.

Please save your license secret to a safe place. We will use them later in this guide.

Step 5. Configure your license secret

Once you get the license secret, you should put it to the thingsboard configuration file.

Step 5.1. Connect to your Thingsboard Instance over SSH

Please use the official Azure guide on how to connect to Azure VM using SSH keys.

Note: You will need to use instance Public IP (see Step 3) and the key file (see Step 2.1)

Step 5.2. Put License Secret to thingsboard configuration file

Open the file for editing using the following command:

1

sudo nano /etc/thingsboard/conf/thingsboard.conf

Locate the following configuration block:

1
2
3

# License secret obtained from ThingsBoard License Portal (https://license.thingsboard.io)
# UNCOMMENT NEXT LINE AND PUT YOUR LICENSE SECRET:
# export TB_LICENSE_SECRET=

and put your license secret. Please don’t forget to uncomment the export statement. See example below:

1
2
3

# License secret obtained from ThingsBoard License Portal (https://license.thingsboard.io)
# UNCOMMENT NEXT LINE AND PUT YOUR LICENSE SECRET:
export TB_LICENSE_SECRET=YOUR_LICENSE_SECRET_HERE

Step 6. Launch ThingsBoard service

Execute the following command to start ThingsBoard:

1

sudo service thingsboard start
Doc info icon

Please allow up to 120 seconds for the Web UI to start. This is applicable only for slow machines with 1-2 CPUs or 1-2 GB RAM.

Step 7. Connect to Thingsboard UI

Now you can open this link in your browser:

  • http://PUBLIC_IP_ADDRESS/login

In this example:

  • http://40.121.179.240/login

Use this login to connect as system Administrator

  • sysadmin@thingsboard.org

Default password for System Administrator is:

  • sysadmin

Now you can proceed to the next steps.

Post-installation steps

Configure HAProxy to enable HTTPS

  • Step 1. Assign valid domain name system (DNS) record to your instance external IP address.
  • Step 2. Connect to your instance using SSH or PuTTY using instructions from the previous questions above.
  • Step 3. Execute the following commands: 
    1
2

     sudo certbot-certonly --domain smth.yourcompany.com --email support@yourcompany.com
 sudo haproxy-refresh

    where smth.yourcompany.com is your DNS name from the second step and support@yourcompany.com is your email to get notifications from certbot.

Next steps