ThingsBoard PE v3.3.x upgrade instructions for Docker

• Upgrading ThingsBoard PE to 3.3.4.1
  • ThingsBoard PE image download
  • ThingsBoard PE service upgrade
• Upgrading ThingsBoard PE to 3.3.4
  • ThingsBoard PE image download
  • ThingsBoard PE service upgrade
• Upgrading ThingsBoard PE to 3.3.3
  • ThingsBoard PE image download
  • ThingsBoard PE service upgrade
• Upgrading ThingsBoard PE to 3.3.2
  • ThingsBoard PE image download
  • ThingsBoard PE service upgrade
• Upgrading ThingsBoard PE to 3.3.1
  • ThingsBoard PE image download
  • ThingsBoard PE service upgrade
• Upgrading ThingsBoard PE to 3.3
  • ThingsBoard PE image download
  • ThingsBoard PE service upgrade

Upgrading ThingsBoard PE to 3.3.4.1

NOTE:
These upgrade steps are applicable for ThingsBoard version 3.3.4PE. In order to upgrade to 3.3.4.1PE you need to upgrade to 3.3.4PE first.

ThingsBoard PE image download

Download ThingsBoard PE Docker image:

1
docker pull thingsboard/tb-pe:3.3.4.1PE

ThingsBoard PE service upgrade

• Stop ThingsBoard mytbpe container if it is running.

1
docker compose stop mytbpe

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose stop mytbpe

• Update docker-compose.yml

1
2
3
4
< . . . >
  mytbpe:
    image: "thingsboard/tb-pe:3.3.4.1PE"
< . . . >

• Start ThingsBoard:

1
docker compose up -d

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose up -d

Upgrading ThingsBoard PE to 3.3.4

NOTE:
These upgrade steps are applicable for ThingsBoard version 3.3.3PE. In order to upgrade to 3.3.4PE you need to upgrade to 3.3.3PE first.

ThingsBoard PE image download

Download ThingsBoard PE Docker image:

1
docker pull thingsboard/tb-pe:3.3.4PE

ThingsBoard PE service upgrade

• Stop ThingsBoard mytbpe container if it is running.

1
docker compose stop mytbpe

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose stop mytbpe

• Update docker-compose.yml

1
2
3
4
< . . . >
  mytbpe:
    image: "thingsboard/tb-pe:3.3.4PE"
< . . . >

• Change upgradeversion variable:

1
echo '3.3.3' | sudo tee ~/.mytbpe-data/.upgradeversion

• Execute the following commands to upgrade ThingsBoard to the new version:

1
docker compose run mytbpe upgrade-tb.sh

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose run mytbpe upgrade-tb.sh

• Start ThingsBoard:

1
docker compose up -d

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose up -d

Upgrading ThingsBoard PE to 3.3.3

NOTE: These upgrade steps are applicable for ThingsBoard version 3.3.2PE. In order to upgrade to 3.3.3PE you need to upgrade to 3.3.2PE first.

Important note before upgrading to ThingsBoard 3.3.3

ThingsBoard UI was migrated to Angular 12. You need to re-build your custom widgets and rule nodes (which use UI) on Angular 12.

ThingsBoard PE image download

Download ThingsBoard PE Docker image:

1
docker pull thingsboard/tb-pe:3.3.3PE

ThingsBoard PE service upgrade

• Stop ThingsBoard mytbpe container if it is running.

1
docker compose stop mytbpe

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose stop mytbpe

• Update docker-compose.yml

1
2
3
4
< . . . >
  mytbpe:
    image: "thingsboard/tb-pe:3.3.3PE"
< . . . >

• Change upgradeversion variable:

1
echo '3.3.2' | sudo tee ~/.mytbpe-data/.upgradeversion

• Execute the following commands to upgrade ThingsBoard to the new version:

1
docker compose run mytbpe upgrade-tb.sh

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose run mytbpe upgrade-tb.sh

• Start ThingsBoard:

1
docker compose up -d

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose up -d

Upgrading ThingsBoard PE to 3.3.2

NOTE: These upgrade steps are applicable for ThingsBoard version 3.3.1PE. In order to upgrade to 3.3.2PE you need to upgrade to 3.3.1PE first.

ThingsBoard PE image download

Download ThingsBoard PE Docker image:

1
docker pull thingsboard/tb-pe:3.3.2PE

ThingsBoard PE service upgrade

• Stop ThingsBoard mytbpe container if it is running.

1
docker compose stop mytbpe

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose stop mytbpe

• Update docker-compose.yml

1
2
3
4
< . . . >
  mytbpe:
    image: "thingsboard/tb-pe:3.3.2PE"
< . . . >

• Change upgradeversion variable:

1
echo '3.3.1' | sudo tee ~/.mytbpe-data/.upgradeversion

• Execute the following commands to upgrade ThingsBoard to the new version:

1
docker compose run mytbpe upgrade-tb.sh

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose run mytbpe upgrade-tb.sh

• Start ThingsBoard:

1
docker compose up -d

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose up -d

Upgrading ThingsBoard PE to 3.3.1

NOTE: These upgrade steps are applicable for ThingsBoard version 3.3.0PE. In order to upgrade to 3.3.1PE you need to upgrade to 3.3.0PE first.

ThingsBoard PE image download

Download ThingsBoard PE Docker image:

1
docker pull thingsboard/tb-pe:3.3.1PE

ThingsBoard PE service upgrade

• Stop ThingsBoard mytbpe container if it is running.

1
docker compose stop mytbpe

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose stop mytbpe

• Update docker-compose.yml

1
2
3
4
< . . . >
  mytbpe:
    image: "thingsboard/tb-pe:3.3.1PE"
< . . . >

• Change upgradeversion variable:

1
echo '3.3.0' | sudo tee ~/.mytbpe-data/.upgradeversion

• Execute the following commands to upgrade ThingsBoard to the new version:

1
docker compose run mytbpe upgrade-tb.sh

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose run mytbpe upgrade-tb.sh

• Start ThingsBoard:

1
docker compose up -d

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose up -d

Upgrading ThingsBoard PE to 3.3

NOTE: These upgrade steps are applicable for ThingsBoard version 3.2.2PE. In order to upgrade to 3.3PE you need to upgrade to 3.2.2PE first.

ThingsBoard PE image download

Download ThingsBoard PE Docker image:

1
docker pull thingsboard/tb-pe:3.3.0PE

ThingsBoard PE service upgrade

• Stop ThingsBoard mytbpe container if it is running.

1
docker compose stop mytbpe

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose stop mytbpe

• Update docker-compose.yml

1
2
3
4
< . . . >
  mytbpe:
    image: "thingsboard/tb-pe:3.3.0PE"
< . . . >

• Change upgradeversion variable:

1
echo '3.2.2' | sudo tee ~/.mytbpe-data/.upgradeversion

• Execute the following commands to upgrade ThingsBoard to the new version:

1
docker compose run mytbpe upgrade-tb.sh

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose run mytbpe upgrade-tb.sh

• Start ThingsBoard:

1
docker compose up -d

If you still rely on Docker Compose as docker-compose (with a hyphen) execute next command:
docker-compose up -d